New Tahoe Yukon Forum banner
1 - 20 of 123 Posts

·
Registered
Joined
·
1 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #4 ·
Looks great, I just got my high country tachoe, looking for a lowering kit, which one did you use? Is there an exhaust, air intake available, if you know?Thank you, Mikhail
Welcome to the forum @Mikhail! Congrats on your new Tahoe! I wish this was mine but it's not. As for the lowering kit, I'm not sure which one they used but I went on their website and they use kits from Rough Country, Ready Lift, or Fox.


http://instagr.am/p/CDnC7rIgALY/
 

·
Registered
Joined
·
41 Posts
Looks great, I just got my high country tachoe, looking for a lowering kit, which one did you use? Is there an exhaust, air intake available, if you know?Thank you, Mikhail
Let me know what lowering kit you use, not a lot of info out there yet on a lowering kit for 2021 Tahoe
 

·
Registered
Joined
·
37 Posts
Just reached out to xtreme truck and trailering. Woman who answered was awesome. She explained this Tahoe was done using front Belltech springs off of older model year like ‘09-19 Tahoe. They then swapped the OEM front springs to the rear that brought it down. I was shocked fronts would bring the rear down that much.
 

·
Registered
Joined
·
37 Posts
Welcome to the forum @Mikhail! Congrats on your new Tahoe! I wish this was mine but it's not. As for the lowering kit, I'm not sure which one they used but I went on their website and they use kits from Rough Country, Ready Lift, or Fox.


http://instagr.am/p/CDnC7rIgALY/
Canyonero I just joined the forum after picking up a ‘21 Black RST last wk. will have to post some pics. Anyway I reached out to xtreme truck and trailer and commented below on the set up they did.
 

·
Registered
Joined
·
1 Posts
Looks great, I just got my high country tachoe, looking for a lowering kit, which one did you use? Is there an exhaust, air intake available, if you know?Thank you, Mikhail
Volant makes a great one that fits great.
261
 

·
Registered
Joined
·
106 Posts
Just reached out to xtreme truck and trailering. Woman who answered was awesome. She explained this Tahoe was done using front Belltech springs off of older model year like ‘09-19 Tahoe. They then swapped the OEM front springs to the rear that brought it down. I was shocked fronts would bring the rear down that much.
Wow, what a difference that makes. I wouldn't have guessed that.
 

·
Registered
Joined
·
5 Posts
These seems as straight forward as can be. Purchase Belltech front springs (Part #12462), install in the fronts, and swap the rears with factory removed fronts. This Tahoe has a great stance!

Anyone know how much the rear drops?
 

·
Registered
Joined
·
37 Posts
These seems as straight forward as can be. Purchase Belltech front springs (Part #12462), install in the fronts, and swap the rears with factory removed fronts. This Tahoe has a great stance!

Anyone know how much the rear drops?
Spoke to installers they said it lowered it about 2-3 inches and they used 1/4 spacers on rear wheels
 

·
Registered
Joined
·
5 Posts
Did they mention why the use of a spacer?
I ordered 24”x10”rims that have a 20mm offset. The wheel vendor told me this should provide me a just about flush fender look. Tires are 295/35/24
 

·
Registered
Joined
·
37 Posts
Did they mention why the use of a spacer?
I ordered 24”x10”rims that have a 20mm offset. The wheel vendor told me this should provide me a just about flush fender look. Tires are 295/35/24
I’m thinking they just didn’t go wide enough on wheel and tire. It’s a 24 but looks kinda narrow and back wheels are pretty recessed compared to fronts. Was looking at side profile of mine and I have the high gloss 22s
 

·
Registered
Joined
·
37 Posts
I didn’t have a tape measure handy but know a $1 bill is 6 inches. Wheel well space from top of tire to fender lip and it’s about that 6 inches. Definitely needs to come down a bit. I’m really debating doing same thing. She said nothing else needed to be modified either.
 

·
Registered
Joined
·
3 Posts
Hey everyone, I did the lowering to mine that xtremetruck recommended. Worked great! Swap the front springs to the rear and order part #12462 from Belltech for the new front springs. View attachment 291
Do you have the air ride suspension? Was wondering if this would effect anything with the suspension. Also are those 24's? Sweet ride bro!
 

·
Registered
Joined
·
37 Posts
Hey everyone, I did the lowering to mine that xtremetruck recommended. Worked great! Swap the front springs to the rear and order part #12462 from Belltech for the new front springs. View attachment 291
This looks freaking awesome! Definitely doing now. Are those 22s or 24s? Where did you order springs from? How has ride changed. You gotta give us the scoop brother
 

·
Registered
2021 Tahoe RST
Joined
·
53 Posts
Hey, and thanks all. I don’t have air ride so not sure how it would work with that. They’re 24” GMC Sierra honeycomb replicas from OE Wheels. The springs are part #12462 from Belltech.
 
1 - 20 of 123 Posts
Top